IVR Script Examples for Indian Businesses
Jaseem Abbas
- Published

An IVR script is the set of lines a caller hears in a phone menu: the greeting, the options, the hold and error messages and the goodbye. This guide gives IVR script examples for Indian businesses in English and Hindi, ready to copy, with the rule TRAI sets on where "speak to an agent" must sit and the same call written for an AI voice agent at the end.
Every script uses [brand] where your business name goes, so no example names a real company. The online store and the clinic in the examples are made up.
What is an IVR script?
An IVR script is the written text of everything an interactive voice response system says to a caller, in the order it says it. Each line is either recorded by a person or generated as speech. Our glossary entry for IVR defines the system. This post is about the words.
The W3C's VoiceXML 2.0 recommendation describes a standard way such dialogs are built, "for creating audio dialogs that feature synthesized speech, digitized audio, recognition of spoken and DTMF key input, recording of spoken input, telephony, and mixed initiative conversations" (the W3C VoiceXML 2.0 recommendation). In plain words, a script is made of prompts, choices and error lines. The key presses are called DTMF tones. The drawing of how the menus connect is the call flow, covered in our guide to call flow design. This post covers what the caller hears at each box.
Human agent scripts are a different job: see call center scripts.
How should an Indian IVR menu be ordered?
Language first, then the service menu, with the option to speak to a person in that second layer. That is what TRAI requires of telecom operators' call centres, and it works as good practice for any business.
The rule is in regulation 7.1.5(ii) of TRAI's Standards of Quality of Service of Access (Wireline and Wireless) and Broadband (Wireline and Wireless) Service Regulations, 2024, dated 2 August 2024: "The menu for speaking to the customer care executive/ operator shall be given preference in the menu options and this menu shall not be below the second layer, the first layer being the choice of language and the second layer the service menu. Further, there should not be unnecessary pause(s) before extending the option to the subscriber for speaking to the customer care executive/operator." You can read it in the TRAI regulation (read on 15 November 2026). TRAI also publishes later files on its regulation page, so check there for changes.
Two points from the same text. The rule binds telecom service providers' call centres, so for other businesses it is a yardstick, not a legal duty. And TRAI's explanatory memorandum says the regulation "does not mandate to implement Interactive Voice Response System (IVRS)": IVR is normally for "routine queries" and "an effective IVR System certainly optimizes the load on the agents".
The same text sets a number you can use on a dashboard: 95% of calls answered by the operator within 90 seconds, counted from the key press. Our guide to the call center dashboard shows how to track it.
Our own rules on top of TRAI's:
- Four options or fewer on each menu, the most common reason first.
- The same key for a person on every menu, such as 0.
- Name the reason, then the key: "for order status, press 1", not "press 1 for order status".
- Offer repeat (star) and back (hash) on every menu.
What should the IVR greeting say?
The greeting says who you are and offers the language choice, and nothing else, in under ten seconds. The ten seconds is our rule of thumb, not a standard. A caller who has just dialled wants to be on their way, and marketing lines at the start only delay the menu.
Greeting and language menu, English:
Welcome to [brand] customer care.
For English, press 1. For Hindi, press 2.
Greeting and language menu, Hindi:
[brand] customer care में आपका स्वागत है।
English के लिए 1 दबाएँ, Hindi के लिए 2 दबाएँ।
Write Hindi as people speak it, with common English words left in English. Other Indian languages need the same care: have a native speaker write the lines, rather than swapping words from English. The languages page lists the Indian languages Bananaflow's agents speak.
What are good IVR scripts for common menus?
Name the reason first, then the key, with four options or fewer and the same key for a person on every menu. Here are two ready menus. Copy them and rename the options for your business.
An online store's main menu
English:
For order status, press 1.
For returns and refunds, press 2.
For a payment issue, press 3.
To speak to an agent, press 0.
Hindi:
Order का status जानने के लिए 1 दबाएँ।
Return और refund के लिए 2 दबाएँ।
Payment issue के लिए 3 दबाएँ।
Agent से बात करने के लिए 0 दबाएँ।
A clinic's main menu
English:
To book or change an appointment, press 1.
For lab reports, press 2.
For clinic timings, press 3.
To speak to the front desk, press 0.
Hindi:
Appointment book या change करने के लिए 1 दबाएँ।
Lab report के लिए 2 दबाएँ।
Clinic की timing जानने के लिए 3 दबाएँ।
Front desk से बात करने के लिए 0 दबाएँ।
A person is one key away on both menus, in the second layer, as TRAI's rule asks. The key to a person is the same on every menu, so a caller who knows it can press it early. For how calls are sent on from a menu, see call routing, and for the numbers callers dial in, the entry on toll-free numbers.
What should hold, error and after-hours messages say?
Tell the caller what is happening and what happens next, and give a way out: a callback, the hours or a person. A message that only says "please wait" leaves the caller guessing, and a caller who guesses hangs up.
After hours, English:
Our lines are closed right now.
We are open from 9 in the morning to 6 in the evening, Monday to Saturday.
Please call us then, or press 1 and we will call you back tomorrow morning.
After hours, Hindi:
अभी हम बंद हैं। सुबह 9 से शाम 6 तक, Monday से Saturday, हम खुले हैं।
तब call कर लीजिएगा, या 1 दबा दीजिए और हम कल सुबह callback कर लेंगे।
Hold, English:
Please stay on the line. An agent will be with you shortly.
If you would like us to call you back instead, press 1.
Hold, Hindi:
प्लीज़ line पर बने रहिए। Agent जल्दी ही जुड़ेंगे।
या फिर आप चाहें तो हम callback कर लें, इसके लिए 1 दबा दीजिए।
Invalid choice and no reply, English:
Sorry, that is not a valid choice. Please listen to the options again.
We did not hear a reply. To hear the options again, press the star key.
Invalid choice and no reply, Hindi:
माफ़ कीजिए, ये valid choice नहीं है। कृपया options फिर से सुन लीजिए।
हमें कोई जवाब नहीं मिला। Options फिर से सुनने के लिए star key दबाइए।
Goodbye, English and Hindi:
Thank you for calling [brand]. Have a good day.
[brand] पर call करने के लिए धन्यवाद। आपका दिन अच्छा रहे।
Only promise a callback you will make. The after-hours and hold scripts above are messages for your own phone setup. How the callback happens is up to your team.
Avoid "your call is important to us" loops. They say nothing the caller can use. A short line with the hours or a callback is better. The map of where each message sits is the call flow, which also covers the IVR flow.
How do you set up and test an IVR script?
Record or generate each line, play the whole menu end to end on a real phone, and time every path to a person. IVR setup is a short list:
- Write every line in a single document, with the key for each option.
- Record or generate the audio. Use one voice for the whole menu, in each language.
- Load the menu on your phone system or carrier, with the language layer first.
- Call it from a mobile phone on at least two networks, and walk every path to its end.
- Time the path to a person from the first ring. If a caller needs more than a few seconds of menu to reach one, trim the lines.
- Check the unhappy paths: an invalid key, silence and a hang-up in the middle of a line.
Do it again after every change to a line. Our guide to how to test a voice agent covers the same habit for AI agents.
How does the same call sound with an AI voice agent?
The caller says why they are calling, in their own words and language, and the agent answers, looks it up or passes the call to a person. There is no menu to read out. The script becomes an opening line plus instructions.
Here is the online store's call, written for a voice agent. The opening line in Hindi:
नमस्ते, [brand] customer care से बात कर रहे हैं।
बताइए, कैसे मदद कर सकते हैं?
And a short exchange that follows:
Caller: मेरा order अभी तक deliver नहीं हुआ है।
Agent: हम अभी ये check कर लेते हैं। अपना order number बता दीजिए।
Then the instructions the agent follows, in plain words. This is an example, and your own prompt will name your own tools:
You are customer care for [brand], an online store. Follow the caller's language.
Find out why they are calling in one question.
For order status, ask for the order number and look it up with the order tool.
For returns and refunds, answer from the returns policy file.
If the caller asks for a person, or the lookup fails twice, transfer the call to the support team.
End every call with a one-line summary and an outcome code.
How to write those instructions, and where each rule lives, is covered in the voice agent prompt guide. The choice between a menu and an agent is in IVR versus voicebot.
How Bananaflow fits
Bananaflow builds AI voice agents that answer your inbound calls in place of a press-1 menu, as the AI IVR page describes. The caller says why they are calling, in English or one of 10 Indian languages, and the agent follows their language.
The agent answers from your files (PDF, DOCX, TXT and Markdown), looks things up through your tools (HTTP tools, MCP servers and 100+ apps) or passes the call to a person, which works with Twilio, Plivo, Telnyx, Cloudonix and Asterisk. Every call is logged with an outcome, a transcript and a recording, and you can test any agent in the browser before it takes real calls. Pre-recorded audio can be mixed with generated speech, so a fixed line can stay as a recording while the rest is spoken live.
What should you remember about IVR scripts?
- Greeting, language, then a menu of four options or fewer, reason first and key second.
- A person in the second layer, on the same key everywhere.
- Every message says what happens next: the hours, a callback or a person.
- Hindi written as people speak it, with English words such as order and refund left in English.
- With an AI voice agent, the script is an opening line and instructions, and the caller speaks instead of pressing keys.
Start this week by reading your own IVR aloud on a real call, timing the path to a person and cutting every line a caller does not need.
FAQ
Frequently asked questions
What is an IVR script?
An IVR script is the set of lines a caller hears in a phone menu: the greeting, the options, the hold and error messages and the goodbye. Each line is either recorded by a person or generated as speech, and each option has a key attached.
How long should an IVR greeting be?
Under ten seconds is our rule of thumb, not a standard. Say who you are, offer the language choice and stop. Marketing lines at the start only delay the menu.
Where should "speak to an agent" go in an IVR menu?
No lower than the second layer. TRAI's 2024 quality of service regulations say the menu for speaking to a customer care executive shall not be below the second layer, the first layer being the choice of language and the second the service menu. The rule binds telecom operators' call centres, and works as good practice for any business.
Should an Indian IVR start with a language choice?
TRAI's rule places the choice of language as the first layer, so yes if you follow it. A greeting that names your business and offers English and Hindi, for example, lets a caller pick before any other line plays.
Can an IVR script be in Hindi and English?
Yes. Offer the choice in the first layer and write each language as people speak it, leaving common English words such as order, refund and OTP in English. The post has copyable lines in both languages for the greeting, two menus, hold, after-hours and error messages.
What replaces an IVR script when you use an AI voice agent?
An opening line plus a set of instructions. The caller says why they are calling, and the agent answers from your files, looks the fact up through your tools or passes the call to a person. There is no menu to read out.




