Skip to content

Bananaflow MCP is live.

Read the docs

DTMF full form: how touch-tone input works on calls

Jaseem Abbas, founder of Bananaflow, in glasses and a dark top against a pale background.Jaseem Abbas

Published

How does DTMF work in India?

DTMF works by sending two tones at once for every key you press, and the system at the other end listens for that pair and turns it into a digit. ITU-T, the telecom standards body, sets out the push-button phone itself in Recommendation Q.23, "Technical features of push-button telephone sets".

The IETF's RFC 4733 shows the pairs in its own examples: the key "1" is a 697 Hz tone with a 1209 Hz tone, and the key "9" is 852 Hz with 1477 Hz. The same RFC says that in the most common application the tones go one way, from the calling end, and the device that consumes them "is most commonly an IVR".

Picture a card helpline of a bank in Hyderabad. A recorded voice says: press 1 for your balance, press 2 to block a card. The customer presses 2, then keys in the last four digits of the card and presses the hash key to finish. Each press sends a tone pair, and the menu reads them in order. The bank and the helpline are made up for this example.

In India the same pattern runs on bank, telecom, utility and government helplines. TRAI's 2019 recommendations on other service providers (paragraph 2.102, read 15 November 2026) list IVR among the services of an Indian contact centre platform.

Each key sends two tones at once, and the menu reads the pair as one digit.

What does DTMF stand for?

DTMF stands for dual-tone multi-frequency, and "touch-tone" is the older name from push-button phones. The word dual means two frequencies sound together for each key. RFC 4733 spells it "Dual-Tone Multifrequency".

How does DTMF travel on a VoIP call?

On a VoIP call, DTMF is sent either as audio tones inside the voice stream or as small events beside it. RFC 4733 defines the second way, explaining that "low-rate voice codecs cannot be guaranteed to reproduce these tone signals accurately enough for automatic recognition", so it carries the digit as an event in the RTP stream instead of as a sound. Read more in VoIP: meaning and rules in India and SIP trunk: meaning and how SIP trunking works.

How does AI change DTMF?

An AI voice agent lets the caller say what they need in place of pressing keys, so the menu tree gets shorter. Instead of "press 2 to block a card", the caller says "my card is lost" and the agent works out the rest. IVR: full form and how it works lays out the two paths side by side, and IVR vs voicebot: what changes goes deeper.

On Bananaflow, the caller says what they need in plain speech, in English or one of 10 Indian languages, and the agent answers in the same language. To see an inbound call from start to finish, read how a Bananaflow agent takes a spoken request on an inbound call. For how a call flow is drawn, read how to design a call flow.

What do the star and hash keys do?

The star (*) and hash (#) keys are two extra DTMF keys, used as symbols rather than digits. A menu often asks for the hash key to mark the end of a number you keyed in, and the star key to go back. Which job each key has is set by whoever builds the menu, not by the standard.

FAQ

Frequently asked questions

  • What is the full form of DTMF?

    DTMF stands for dual-tone multi-frequency. Each key on a push-button phone sends two audio tones at once, and the system at the other end reads the pair as one digit or symbol.

  • What is DTMF in simple words?

    It is the sound your phone makes when you press a key, and the way a phone menu knows which key you pressed. The sound is two tones played together, one high and one low.

  • Which tones does each key send?

    Each key sends one tone from a low group and one from a high group. RFC 4733 shows the key 1 as 697 Hz plus 1209 Hz, and the key 9 as 852 Hz plus 1477 Hz.

  • What is the link between DTMF and IVR?

    An IVR menu is the most common reader of DTMF: the caller presses keys, and the IVR reads the tones to choose the next menu or ask for a number. RFC 4733 calls the IVR the most common consuming device.

  • Does DTMF work over VoIP?

    Yes. It can travel as tones inside the audio, or as events in the RTP stream, which RFC 4733 defines because compressed voice codecs may not reproduce the tones accurately enough to be recognised.

  • What are the star and hash keys for?

    They are two extra DTMF symbols. Menus often use hash to mark the end of a number you keyed in and star to go back, but the meaning is set by whoever builds the menu.

  • Can callers speak instead of pressing keys?

    On Bananaflow, yes: the caller says what they need in plain speech, in English or one of 10 Indian languages, and the agent works out the request without a menu to climb.

Written by

  • Jaseem Abbas, founder of Bananaflow, in glasses and a dark top against a pale background.

    Jaseem Abbas

    Founder, Bananaflow

    Jaseem founded Bananaflow to build voice AI that understands how people in India really speak, including the switch between languages in the middle of a call.

Bring us one process. We'll pilot it on your real calls, with your team as the fallback.

Plan a pilot