Skip to content

Bananaflow MCP is live.

Read the docs

Answering Machine Detection on Indian Calls

Jaseem Abbas, founder of Bananaflow, in glasses and a dark top against a pale background.Jaseem Abbas

Published
Cover for "Answering Machine Detection on Indian Calls": a white isometric line diagram of listening before speaking: a puck, the connected call, runs onto a lit tile with a sound wave standing on it under a pill reading Listen first, and a bold path leads on to a block with a person standing on it, drawn over a soft, out-of-focus blue poppy in muted sky blue, its crinkled petals blurred into veils, with an aqua haze at one end and a peach glow at the other.

Answering machine detection (AMD) is the check an outbound dialer or voice agent runs in the first seconds of a call to decide whether a person, a voicemail, a network announcement or a phone menu has answered. It is also called voicemail detection, and telecom engineers call the wider job call progress analysis. This guide explains how it works, why it misfires, and what an Indian outbound team should do with each kind of answer.

Here is the problem in a scene. A coaching centre in Lucknow loads 2,000 numbers into its dialer for a NEET batch campaign. By lunch, the agent has said "Hello, this is Kavya from Pragati Coaching" forty times to a recorded voice that says the number is switched off. Each time, Kavya lost about 15 seconds and logged the call as "connected". The campaign report now says the connect rate is high and the leads are cold. The centre and Kavya are made up.

What is answering machine detection?

Answering machine detection is the step that sorts a connected call by who answered it, before anyone speaks to the wrong thing. The dialer or voice agent listens for a short time, makes a call on what it hears, and then either connects an agent, hangs up, or logs a status. It exists because a connected call is not the same as a conversation.

Four kinds of answer matter on an Indian outbound list:

  • A person. A short greeting, then a wait.
  • An operator message. A recorded message from the network, such as one saying the phone is switched off or not reachable (the wording varies by operator).
  • An IVR. A recorded phone menu on a business line: "press 1 for sales".
  • Voicemail. A recorded greeting from the person or the network, often ending in a beep.
A connected call sorted by who answered: a person, an operator message, an IVR or voicemail, each with what to do next.

Detection matters most when the dialer places calls faster than agents can take them. Our guide to what an auto dialer is explains the power and predictive modes, where a person who answers needs an agent right away and a machine should never reach one.

What is the difference between an answering machine and voicemail?

They are the same job in two different places. An answering machine is a device at the called person's home or office that plays a greeting and records a message. Voicemail is a mailbox kept by the phone network that does the same thing. For a dialer both sound alike: a recorded greeting, often a beep, then a recording. So detection tools usually treat them as one result.

How does answering machine detection work?

Traditional detection does not listen to what is said. It listens to the shape of the audio in the first seconds. The usual cues are how long the first stretch of speech lasts, how much silence follows it, the rhythm of the speech, and a beep. A person says "Hello?" and stops. A recording runs on for several seconds and then, often, beeps.

Twilio, a carrier, documents this clearly in its answering machine detection docs. Its defaults give a feel for the numbers:

SettingTwilio defaultWhat it means
Speech threshold2,400 msSpeech longer than this is more likely a machine greeting
Speech end threshold1,200 msA silence this long after speech suggests the greeting has ended
Timeout30 secondsIf no decision is reached by then, the result is "unknown"

Twilio returns a result such as human, machine, fax or unknown. With the optional message-end setting it waits for the end of the greeting, usually marked by a beep, so a message can be left at the right moment. Plivo, another carrier, runs detection in the background and posts the result to your system, with a default analysis time of 5,000 ms (Plivo's machine detection docs). These are one carrier's defaults, shown only to explain how detection works.

The signals detection listens for in the first seconds: the length of the greeting, a beep, the pause pattern after hello, and recognised words.

Some systems also listen for special information tones. A special information tone is a set of three rising tones that usually comes before a recorded announcement that a call failed, and it is meant to be picked up by automated dialing equipment (Wikipedia on the special information tone). We could not verify whether Indian operators play one before their messages, so do not assume your detector gets that help on Indian numbers.

How is AI detection different from a timer?

An AI voice agent can use the words as well as the shape of the sound. Phrases like "leave a message after the tone" or "press 1 for sales" tell it more than a greeting's length does. It still needs a timeout and it still makes mistakes, on short greetings, noisy lines and languages it was not tested in. Bananaflow's AI dialer runs this check before the agent speaks.

Why does answering machine detection get it wrong?

Detection is a guess made in a hurry, and the hurry is the problem. The longer it waits, the more accurate it gets, and the longer a real person hears silence. Twilio's docs describe the trade-off: for short voicemails there is typically 1,000 to 2,000 ms of audio, then 1,200 to 2,400 ms of silence, then more audio before the beep. Raising the silence threshold catches those but delays the answer for people by the same amount. A person who says "Hello", pauses for two seconds and says "Hello" again may be taken for a machine.

That wait has a cost you can hear. When a person answers and nothing happens, they say "Hello? Hello?" and hang up. Our guide to auto dialers covers the silent call problem and the abandoned call rules that sit behind it.

Which error costs more?

There are two errors, and they do not cost the same. This framing is ours.

ErrorWhat happenedWhat it costs
False machineA person is treated as a machineYou hang up on a customer, who hears a click and may never answer your number again
False humanA machine is treated as a personThe agent talks to a recording for a minute and may speak over a beep, and your connect rate goes up for no reason

In our view the first error is the costly one, so lean towards hearing people, and accept a few more wasted agent seconds on machines. Your connect rate should not count a machine as a person reached either, so decide up front what "answered" means.

Other causes of misfires are common to any detector. A long business greeting looks like a recording. A one-word voicemail ("Hello, please leave a message") looks like a person. Background noise can mask a beep. Accents, languages and code-switching can confuse a system tuned on other speech. If your callers speak Hindi, Tamil and English on the same line, test with all three.

What answers a call in India?

On many Indian lists, more than a person and a mailbox answer the phone. The network itself answers when the phone is off or out of coverage. A business line may answer with a menu. A mobile may answer with a mailbox greeting. We have no verified count of how these split, and it differs by list, so measure yours (the last section of this post shows how).

What does "not reachable" mean on a call?

"Not reachable" means the network could not connect the call to the phone, and it tells you about the network, not the customer. The usual cause is a phone that is switched off, out of coverage or otherwise not registered on the network. The message is recorded by the operator, not by the person you called, and its wording varies by operator and language, so you will hear it in English, Hindi or a regional language.

People search for messages such as "the number you are trying to call is not reachable" and "the number you are calling is switched off", and the meanings are close:

  • Switched off: the phone is off, or has no power or signal registration.
  • Not reachable or out of coverage: the network cannot get the call to the phone right now.
  • Busy or on another call: the line is engaged.
  • Not in service or does not exist: the number is not valid today.

The first three are temporary, and a retry later may work. The last is not, and the number should leave your list. Our call disposition codes guide gives each its own status: SWO, NRE, BSY and INV.

We could not verify whether your carrier counts these calls as answered, so check your own call records. If it does, a dialer's "connected" count will overstate how many people you reached.

Why do IVRs trip up outbound calls?

An IVR is a recorded phone menu that answers a business line and routes callers by key presses or set words (what an IVR is). Call a company's main number and you often meet one: "Welcome to ... press 1 for sales". It is not a person and not a mailbox. A script that starts with "Hello, may I speak to Mr Sharma?" is wasted on it, and an agent who stays on the line listening to a menu is an agent not talking to a customer.

What should you do with each result?

Hang up on anything that is not a person, log why, and choose a retry rule per result. The table gives our suggestion for each result, with the status code from our call disposition codes guide. The retry gaps and the extra codes are our advice, not a standard, so change them to fit your campaign.

  • Who answered: A person

    How you tell
    A short greeting such as Hello or Haan, boliye, then a wait
    What to do
    Speak at once; the first second matters
    Status to log
    Connected, then the outcome code
    When to retry
    Not needed
  • Who answered: Operator message: switched off

    How you tell
    A recorded network message, no beep
    What to do
    Hang up
    Status to log
    SWO
    When to retry
    Later the same day, then the next day
  • Who answered: Operator message: not reachable

    How you tell
    The same kind of message
    What to do
    Hang up
    Status to log
    NRE
    When to retry
    Later; flag the number after repeated misses
  • Who answered: Operator message: busy

    How you tell
    A recorded message or a busy tone
    What to do
    Hang up
    Status to log
    BSY
    When to retry
    A short gap, from minutes to an hour
  • Who answered: Operator message: not in service

    How you tell
    The same kind of message
    What to do
    Hang up
    Status to log
    INV
    When to retry
    Do not retry; clean the list
  • Who answered: IVR menu

    How you tell
    Press 1 for sales, or Welcome to the company
    What to do
    Hang up; never pitch to a menu
    Status to log
    No code in our list, so add IVR
    When to retry
    Find a direct number or a better time
  • Who answered: Voicemail

    How you tell
    A long greeting, often a beep
    What to do
    Hang up, or leave a short message under your rules
    Status to log
    VM
    When to retry
    Retry; do not count it as a person reached
  • Who answered: Unknown or silence

    How you tell
    Nothing clear before the timeout
    What to do
    Say a short greeting and listen; never hang up on silence alone
    Status to log
    NA, or your own Unknown code
    When to retry
    As the list says

Two of these need a word. First, the IVR row has no code in our disposition list, because that list was built around sales and collections outcomes. If you add one, keep it in the not-connected group so it is set by the system and never picked by an agent. Second, silence is not proof of a machine. A person on a poor line may just be waiting, so a short greeting is safer than a hang-up.

When should you retry?

Retry on the reason the call failed, and cap the tries. The gaps in the table are a starting point. A switched-off phone is often back on within hours, a busy line within minutes, and an invalid number never. Beyond the gap, add a daily and a weekly cap per number, call only inside permitted calling hours, and honour the person's DND preference. Our TRAI rules for AI calls page covers the hours and the preference register. A retry rule that ignores them is a compliance risk, not a better campaign.

Should you leave a voicemail or a voicemail drop?

Only if the content and the rules allow it, because a recorded message left on a phone is still a commercial call. A voicemail drop (also called ringless voicemail) means placing a pre-recorded message in a mailbox, often without the phone ringing. We found no Indian rule written for it by name, so read it through the definitions that do exist.

TRAI's definitions are worded around calls, not mailboxes. Its FAQ describes an auto dialer call as one started automatically by equipment where, once the call is answered, the equipment either plays a recorded message or connects to a live person. It describes a robo call as one that uses an artificial or prerecorded voice to deliver a voice message without people on the calling side (TRAI: what is spam or UCC). A recorded message left by a system sits close to both. TRAI's page also says a sender must first have the customer's consent, and the customer's registered preference must allow the call. Since 2026, software-placed calls and their number ranges must be declared to the telecom provider, as explained in our automated calls page. This is not legal advice, so ask your own counsel about voicemail drops before you use one.

If you do leave a message by hand or by system, keep it short and keep it plain. Our call center scripts guide has a template: your name, company, the reason in one line, the callback number twice, and when you will try again. Do not leave one on every attempt. Keep sensitive details out, since someone else may hear it. For health calls that means the clinic name and a number only, as in our guide to doctor appointment reminder calls. For dues, leave nothing a relative should not hear. Our RBI rules for recovery agent calls guide covers what collections calls need.

How should an AI voice agent handle the first seconds of a call?

It should decide who answered before it speaks, greet a person quickly, and never pitch to a menu or a recording. That is a plain list, and each part is a test you can run.

  1. Decide before pitching. Wait for the first sign: a short "Hello?" means speak, a long recorded voice means listen.
  2. Greet fast when it is a person. A pause of a second or two after "Hello?" is where people hang up. Our guide to endpointing and turn detection explains how an agent decides a caller has finished.
  3. Stay silent on a menu or recording. Log the result and end the call.
  4. Log the status. Use the same codes your team already reads in reports.
  5. Test with real recordings. Record an operator message, an IVR menu and a voicemail greeting in each language you call in, and play them to the agent. Our guides to how to test a voice agent and how to build an AI calling agent include a voicemail case in the test list.

How Bananaflow fits

Bananaflow is an AI voice agent platform. Before the agent speaks, it listens to the first thing the far end says and checks whether a person, a voicemail, an IVR menu or a call screener answered (telephony). It matches known phrases first, and an AI check settles the unclear cases within about three seconds. When it detects a machine, it ends the call or plays a message you configure, and it logs a disposition such as voicemail detected or IVR detected.

Whatever tool you use, play your own recorded operator messages to the agent during testing and see what it does. Do the same with any tool you are comparing.

Campaigns run from a CSV with retries, calling time slots and concurrency limits, and every call ends with a transcript, a recording and a disposition (analytics). Customers bring their own numbers.

What should you do next?

Measure your own mix first, because it decides everything else. Run one day of a campaign. Sample 100 answered calls and listen to each. Count how many were a person, an operator message, an IVR and a voicemail. Then check what your dialer logged for each one. If the answers differ a lot, tune the detector and fix the retry rules, starting with the biggest group. This is our suggestion, and it takes one afternoon.

FAQ

Frequently asked questions

  • What is AMD in a call center?

    AMD is answering machine detection: the check a dialer or voice agent runs in the first seconds of a call to decide whether a person, a voicemail, a network announcement or an IVR menu answered. It lets the system pass people to an agent and handle everything else by its own rule.

  • How accurate is answering machine detection?

    There is no honest single number. Accuracy depends on your list, the languages you call in, the line quality and how long the detector waits. A longer wait is more accurate but makes people hear silence. Sample 100 answered calls from your own campaign, listen to them and compare them with what the system logged.

  • What does "not reachable" mean on a call?

    It means the network could not connect the call to the phone, often because the phone is switched off or out of coverage. The message is recorded by the operator, so it says something about the network, not about the customer. In your reports, log it as not reachable and retry later.

  • Should a switched-off number be retried?

    Yes, but with limits. A phone that is switched off is often back on later the same day or the next day, so a later retry can work. Our suggestion is one retry later that day and one the next day, a cap per number, and a flag after repeated misses. Never retry a number that is not in service.

  • Is a voicemail drop legal in India?

    We found no Indian rule that names it, so treat a recorded message as a commercial call. TRAI defines an auto dialer call as one that plays a recorded message or connects to a person once answered, and a robo call as one that delivers a prerecorded message without a person on the calling side. Consent, the customer's registered preference and call declaration apply. This is not legal advice.

  • What is the difference between voicemail detection and IVR detection?

    Voicemail detection spots a recorded greeting where you could leave a message. IVR detection spots a recorded phone menu, such as press 1 for sales, on a business line. Both mean no person is on the line, but the next step differs: a voicemail may take a short message, while a menu should never get a pitch.

  • What is the difference between an answering machine and voicemail?

    An answering machine is a device at the called person's home or office. Voicemail is a mailbox kept by the phone network. Both play a greeting and record a message, so a dialer treats them as one result.

Written by

  • Jaseem Abbas, founder of Bananaflow, in glasses and a dark top against a pale background.

    Jaseem Abbas

    Founder, Bananaflow

    Jaseem founded Bananaflow to build voice AI that understands how people in India really speak, including the switch between languages in the middle of a call.

Similar articles

Bring us one process. We'll pilot it on your real calls, with your team as the fallback.

Plan a pilot